bathroom basin tap

The bathroom basin tap is installed on various designed basins. It is usually used to get up in the morning to wash your face and brush your teeth. Because the space used is relatively small, there is no need to use a tall faucet like a kitchen sink.

If you have a water heater at home, you can also install a basin mixer tap for your basin, so you can wash your hands with hot water when the weather is cold.

bathroom basin tap

Basin Tap Installation and Repair

When it comes to Basin Tap/ Basin Mixer Tap Installation and Repair, there are a few essential things that you require to keep in mind. First, these taps can be pretty tricky to install, especially if you have never done them. The second is that proper installation and repair are essential for ensuring the longevity of your taps. We'll discuss some tips and tricks for installing and repairing Basin Taps/ Basin Mixer Taps in Singapore. Keep reading for more information!

What is a basin mixer tap?

A basin mixer is a tap that combines your hot and cold water feeds into a single spout. A single lever or twin may adjust handles to deliver the appropriate water at any temperature.

How to Fix a Leaky Tap

If your basin tap leaks, the first step is determining where the leak originated. Is it coming from the handle, spout, or base? You can troubleshoot the problem after choosing where the leak is coming from. If the leak emanates from the handle, there's a good chance that a loose screw is to blame. Check if it's easier to tighten with a Phillips head screwdriver while turning the washer round. The washer may need replaced if the leak persists when turned upside down.

If the leak comes from the spout, it's probably because of a faulty O-ring. The O-ring is a tiny rubber ring that seals the connection between the fixture and handle. While unscrewing the handle, replace the old O-ring with a fresh one. Your basin has probably cracked if you're leaking water from the base of your tap. Water damage can be pretty expensive to repair if cracks occur in your basin; they should not be allowed to persist.

If you're having problems repairing the leak yourself, or if it's still happening, we recommend calling a professional basin tap repair business in Singapore. They'll be able to swiftly find the problem and get your basin tap back up and running.

Basin Tap Installation

Although a tap installation is not as tricky as other plumbing activities, those without experience may find it so. As a result, we've divided the faucet installation procedure into six easy stages for your convenience in this post. You may prevent common tap replacement errors and the need to hire a professional plumber by following these steps. Furthermore, you'll be able to verify that your faucet is functioning correctly.

Tools Needed for Tap Installation

Before you start a tap installation, make sure you have the following equipment:

Supply Lines

You'll need the following elements to ensure your tap discharges water properly. As a result, be sure that the ones you have are in good operating order and durable enough to endure for the long term before replacing your tap.

Measuring Tape

This is required if your sink or bathtub has a shutoff valve. It calculates the length between the faucet and the supply lines.

Silicone Sealant

A waterproof seal must be used to connect all of the facet joints.

Basin Wrench

This tool allows you to reach and tighten hard-to-reach mounting nuts with ease.

Screwdriver

This makes removing any tightened nuts or fixtures from the faucet's body quick and easy.

Rotary/Oscillating Tool

If the fixtures are tightened excessively to remove, a cutting wheel or disc is necessary to cut the metal sections of your tap. Let's look at how to install a fast faucet now that you know what equipment you'll need.

Remove Your Existing Faucet

If you're replacing an existing kitchen or bathroom faucet, remove it from the body first. Remove the nuts, pop-up drains, and any other attachments. If your tap's components are difficult to detach, consider utilizing a rotary or oscillating tool to cut away the metal surrounding them. This may be necessary if your faucet has been in operation for a long time or if it has accumulated mold, limescale, or rust.

Apply Silicone Caulking

A fail-safe is usually built into well-known faucet makers' faucets to prevent water accumulation. However, to be secure, cover the edges of your tap with silicone caulking. Wipe away any excess silicone with mineral spirits and a paper towel if too much is used.

Upgrade Your Existing Supply Lines

When it comes to connecting supply lines, they are usually the most challenging since any mistake might result in a water leak. Fortunately, contemporary supply lines are far more resistant to wear and tear than their predecessors, allowing you to use them confidently. When purchasing supply lines, ensure they're the appropriate length with a measuring tape. If you believe your water tap's supply lines are too short, you may lengthen them using extensions available at your local hardware store.

Tighten Loose Water Valves

If you don't want any plumbing leaks around your tap, ensure all loose water valves are tightened. Over-tightening them, on the other hand, might prevent the shutoff valve from staying open permanently.

Detach The Aerator

After that, make sure the aerator on your new tap is removed. If left in place, it will avoid collecting any debris or minerals released while installing the faucet. If you leave the aerator in place after installing a faucet, problems such as a sluggish water tap flow may occur.

Check for Signs of Water Leaks

In the final stage, turn on your water supply and look for water leaks near your new tap. Repeat steps 1 to 3 to allow your tap to function correctly if any faucet leaks are discovered.

Conclusion

You may verify that your tap is put in quickly once you've learned the required tools and strategies. After completing this project, you'll also be able to wash and bathe without difficulty, avoiding problems like a leaking tap.

If you're having difficulties with your tap, don't hesitate to contact ACTIVE-PLUMBING for assistance. With our skilled tap and faucet services, we can ensure that your faucet is set up correctly for your convenience.

TESTIMONIALS

Check what our clients say about us

approach

The Best Plumbing Services Supply in Singapore

  • HDB Plumbing and sanitary fixture repair, installation, and replacement for both private residential, commercial, and industrial structures
  • Plugging of pipe water leakage
  • Pipe installation
  • Manual labor or machine-assisted clearance of clogged pipes, basins, toilet bowls, floor traps, maintenance holes, and other items to free them
  • Water taps, mixer taps, piping, bottle traps, flexible hoses, sinks, basin bowls, urinal bowl covers, flush cisterns and toilet attachments may be necessary.
  • Water heaters ( instant or storage) and dustbins will be supplied and installed.
  • Replacement of pipes from the chimney to every room in the home. Pipe materials include copper, PVC, or stainless steel.
  • Replacement of toilet flooring, shower screens, and other bathroom hardware
  • >
    Call Now Button