You're not alone if your toilet is clogged and you don't know how to fix it. Toilet bowl repair can be a daunting task, but it's something that you can do yourself with a little bit of instruction. We'll show you how to unclog your toilet and get it working again after the blockage has been removed. We'll also give some ideas on how to avoid future clogs. Let's get this party started!

How to Fix a Leaky Toilet?

To begin, turn off the water to your toilet. This can usually be done by rotating the knob behind the toilet. Then turn off the water, flush down the toilet to empty the bowl, and remove and set aside the tank lid. Keep careful not to drop the top because it is easily damaged. Now that the tank is empty, you may begin working on repairing any leaks. If your leak comes from a flush valve, replace its washer

  • Remove the washer by removing the nut that is keeping it in place.
  • It's also a good idea to take a photo of the inside of your washer so that you can replace it correctly.
  • Once the new washer is in place, lock it in with the wrench and tighten it as needed.

If the leak comes from a different location, such as the fill valve or supply line, you'll probably need to replace other components. These repairs are typically quite simple and can be done solo if necessary.

After you've fixed the leak, it's time to turn the water back on and check your work. To test your repairs, turn on the water and flush the toilet. There should be no more leaks if everything is in functioning order!

Hopefully, this article has assisted you in dealing with a leaking toilet bowl in Singapore. Calling an expert is typically preferable if you're unsure about the best solution. Even the most amateur do-it-yourselfer can complete many tasks with little knowledge and effort.

Common Toilet Bowl Issues

Large-Volume Flush

When the water level in the tank is too high, the toilet will flush twice its volume to release extra water. You could try lowering your water supply from the valve on the side or back of the toilet bowl. Even if you replace the valve and it happens again, you should get a plumber to look at your toilet bowl components.

Partial Flush

If the flush is too weak to be complete, it might be due to the flapper valve dropping too swiftly due to waterlogging. Keep an eye on the flapper while you're vacuuming. If the toilet's new flush system flapper falls too rapidly, it must be replaced.

Toilet Bowl Choke

When water builds up in your toilet and drains slowly, it may be due to a clogged bowl. These are additional ways to unclog a blocked toilet, but if they appear too time-consuming on your part, you should call a plumber.

Slow Tank Fill

If a shut-off valve is found beneath the tank, it may have been partially closed. It's due to restricted water flow into the tank, which may have been caused by the prior owner or a plumber who had previously worked on the system.

Toilet Bowl Leak

Water could be leaking because of a fault with the toilet base or because the water supply is faulty. Check whether the leaking comes from the pan collar at the bottom of the toilet bowl or the toilet tank supply line. A dripping toilet is not a good sign, and you should get help from a professional plumber as soon as possible.

When Is It Time to Change Your Toilet Bowl?

Have you ever thought about replacing or repairing your toilet bowl after seeing scum or water buildup? Cases may differ depending on the severity of the toilet bowl issue. If your toilet bowl repeatedly needs to be repaired or shows signs of wear and tear, it's best to have it replaced by a plumber right away. Here are some indications that your toilet bowl should be returned:

Constant Clogging

When toilet bowl blockages occur once weekly, replacing your toilet is more cost-effective than continually dealing with toilet bowl choke repairs.

Toilet Bowl Cracks

When you notice puddles of water around the toilet, inspect the porcelain for fractures. Even if your bathroom works, you may have a leaking toilet bowl. In addition to a high water cost, another thing that most individuals are unaware of is that their flooring gets damaged as a result of leaks. This can cause mildew or mold to develop on your flooring as a result of this.

Frequent Need for Repairs

If your toilet is having problems frequently, it's best to have it looked at by a professional. The process for repairing or replacing a window will vary based on the circumstances. The professional will then evaluate the situation and make any required repairs or replacements as needed. It's uncommon for toilets to require continual repair; the fact that it's too damaged to repair is much more likely.

Improper Flushing

Are your water bills increasing? Your toilet's flush system may be malfunctioning. Every flush uses 3 to 5 Gallons of water in a typical bathroom, while a low-flush toilet uses just 2 gallons each time. Perhaps it's time to switch to a low-flush toilet bowl to save water and be environmentally responsible.

SES Plumbing is a professional business that can promptly repair and restore your toilet bowl issues. In our services, we give problem diagnosis, toilet bowl removal, and toilet bowl repair and replacement. We understand the problems that homeowners confront when their toilet bowls cause them difficulties. therefore we have a team of fully certified plumbers to assist you.

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}
Call Now Button